产品参数表
型号
建议处理风量（m³/h）
设备尺寸（长宽高，mm）
内部配置
功率（KW）
电压（V）
风阻(Pa)
参考价格（元）
GYDLZ-2000
500~3000
10001200600
1组410950400蜂窝不锈钢电场、1组电控箱、横插式门结构1.5厚304不锈钢外壳，单面磨砂处理。配套1组400W高频低温等离子电源，设备配套电流自动保护，温度感应器，陶瓷绝缘保护。
0.4
220
≤350
GYUV-5000
3000~7000
100012001100
2组410950400蜂窝不锈钢电场、1组电控箱、横插式门结构1.5厚304不锈钢外壳，单面磨砂处理。配套1组800W高频低温等离子电源，设备配套电流自动保护，温度感应器，每个电子场采用陶瓷绝缘保护。
0.8
220
≤350
GYUV-10000
7000~12000
2000 * 120 * 110
4 组 410 * 950 * 400 蜂窝 不 锈 钢 电 场,2 组 电 控 箱, 横 插 式 Door 结 构 ,以 上 为 途 , 配 套 二 组八百 W 高 频 低 温 等 离 子 电 源 , 设 备 配 套 电 流 自 动 保 护 和 温 度 感 应 器 , 以 及 四 组 电 场 均 采 用 陶 瓷絶 缘 保 护 .
16 KW / H
22 V
≤35
GYUV-15000
12 ~17
20x12x16
6 groups of the mesh not stainless steel electric field, and two control boxes, a lateral door structure with a thickness of 15mm in stainless steel plate, single side frosted treatment . A set of three high-frequency low temperature plasma power supplies are provided for the device, which includes automatic current protection and temperature sensors; each electric field is protected by ceramic insulation.
24 KW / H
22 V
≤35
GYUV-20000
17 ~22 x12x21
8 groups of mesh not stainless steel electric fields and four control boxes with lateral door structure made of stainless steel plate with a thickness of 15mm having single side frosted treatment . Four sets of high-frequency low temperature plasma power supplies are provided for the device including automatic current protection and temperature sensors; eight groups have ceramic insulation.
32 KW / H
22 V
35
GYUV-25000
22 ~27 x12x26
10 groups mesh not stainless steel electric fields and four control boxes with lateral door structure made from stainless steel plate having a thickness of one point five millimeters single side frosted surface treatment . Five sets high frequency low temperature plasma power sources are supplied to the equipment together with automatic current protective devices as well as thermal sensing devices; ten electronic fields utilize ceramic insulation.
40 KW/H
220 volts
35 Pa
GYDLZ-30000 x13x17
12 sets mesh not-stainlesssteel electronic fields alongwith six control units featuring horizontal doors manufactured using fifteen millimeter thick non-magnetic metal plates coated on both sides for anti-corrosion purposes . Six sets high frequency lowtemperature plasma energy providers were included within this setup alongwith automated electrical flow safeguarding systems as well as heat detecting components ; twelve electronic sectors utilized ceramic insulating materials.
48 KW/H
220 volts
< =350Pa
