黑龙江风冷冷水机组规格，制冷设备销售，反复展示其性能。全新造型的TY-08A系列工业风冷冷水机主要适用于塑胶、它可以控制塑胶成形模具温度以缩短成型周期，加速产品定形；该系列运用冷热交换的原理进行冷却，可快速降温，温控稳定。且不受环境因素的影响，是现代工业中不可或缺的配置设备。风冷冷水机和水冷cold water machine用于户外安装和操作。风冷机是直接由空气被机械地传阅，机器的cooling fins，直接驱逐热量大气空气cooling. Coldersimilarly，只是它们在实施cooling coils 的water mist，以帮助cooler cooling,使machine cooler than traditional air efficiency. 没有远程cooling towers通常需要与packaging coolers这些类型。
结构与组成 主要部件为cold water tank（一般machine自带）、pump（一般machine自带）、compressor、condenser and evaporator with connecting pipes. Installation非常简单，连接pipes and power后(380V)即可正常使用。
Condenser：在制冰过程中condenser起着输出热能并使制冰剂得以凝结作用。在蒸发压缩机排出的高压过热蒸汽进入condenser后，将其在工作过程吸收的全部热量，其中包括从蒸发器和制冰压缩机中以及在管道内所吸收的热量都传递给周围介质（water or air）带走；制冰剂高压过热蒸汽重新凝结成液体。（根据cooling medium and cooling方式不同，condenser可分为三类：air-cooled condensers、evaporative condensers 和 flooded plate heat exchangers）。Storage tank：Storage tank is installed after the condenser, with its drain pipe directly connected to the condenser outlet. The liquid refrigerant from the condenser should flow freely into the storage tank for full utilization of the condensing area. On the other hand, when there are changes in heat load at the evaporator, the amount of refrigerant liquid required also changes; then, storage tanks serve as a buffer and reservoir for refrigerant.
For small cold water machines' systems, usually no storage tanks are used but rather rely on continuous circulation through evaporators to maintain stable operation without interruptions.
Expansion valve: Expansion valve in cold water machines serves as both a flow regulator and throttling device; it's located between dry filter dryer and evaporator within a chiller system. Its purpose is to convert high-pressure saturated liquid refrigerant into low-pressure subcooled vapor (mostly liquid with some gas) by allowing it to expand across an orifice before entering evaporation chamber where it absorbs heat from surrounding fluid (usually chilled brine solution). This process achieves cooling effect.
Refrigerants: In modern industrial applications of most industrial cold water machines R22 or R12 are commonly used as working fluids that carry heat away during phase transitions while maintaining desired temperature levels throughout various components involved in chilling processes like compressors etc., which ensures efficient use energy resources!
